Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Clemente, CA
Gate installation in San Clemente means working with salt air, steep driveways, and homes built anywhere from the 1920s to the 1970s. We install automatic driveway gates, pedestrian gates, and sliding gates that hold up to coastal humidity and Santa Ana wind cycles. Whether you’re replacing a rusted wrought-iron gate south of the pier or adding a motorized entry system to a hillside property in 92673, call us at (866) 562-1205 for a free estimate.
Why San Clemente Homes Are Different
San Clemente’s gate work is shaped by the ocean. Marine-layer humidity and salt-laden onshore breezes accelerate rust on iron gates and swell wood gates, especially on the ocean side of I-5. In the older beach-close streets south of the pier, we regularly find wrought-iron gates with rust-jacked hinge plates and salt-frozen latches. The hardware corrodes faster than the gate itself, which means a gate that looks structurally sound may be one hinge failure away from sagging or jamming.
Housing stock runs from 1920s and 1930s Spanish Colonial Revival cottages near the pier to 1960s and 1970s tract homes and custom hilltop estates in 92672 and 92673. Many of the older homes still have original or period-appropriate wrought-iron pedestrian and driveway gates. Wood gates are common in these neighborhoods too, and they show predictable failure patterns: dry-rot at the stiles and bottom rails, especially where sprinklers hit the base. Hillside homes in 92673 see wooden gates swell and stick after marine-layer mornings, then shrink and rattle when Santa Ana winds dry everything out. That cycle loosens hinges and breaks latch alignment over time. Inland Orange County gates fail mainly from heat and sun. San Clemente gates fail from corrosion, moisture, and wind.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main San Clemente Services
Most San Clemente homeowners call us for one of two reasons: a gate that won’t open or close properly, or an electric gate system that stopped responding. Here’s what each service covers.
Gate Repair in San Clemente
Gate repair in San Clemente covers hinges, latches, wheels, tracks, posts, and structural alignment. Coastal rust and dry-rot are the usual culprits here, not impact damage. We repair existing gates rather than pushing replacement, and when parts are needed for common brands we carry them on the truck. If your gate drags on the driveway, leans against its post, or won’t latch, Gate Repair in San Clemente covers the full scope and pricing.
Electric Gate Repair in San Clemente
Electric gate repair in San Clemente means diagnosing motors, control boards, loop detectors, safety sensors, and access keypads. Salt air is hard on circuit boards and wire connections, especially in 92672. We test the full system rather than swapping parts blindly. If your gate beeps but doesn’t move, opens halfway and reverses, or the remote stopped working, Electric Gate Repair in San Clemente explains what we check and what it typically costs.
Gate Installation in San Clemente
Gate installation in San Clemente is about building for coastal conditions from day one. A gate installed with untreated steel hardware or unsealed wood will start failing within two years in the salt air. We install gates that account for the marine layer, the Santa Ana dry spells, and the slope of your specific driveway. For a full overview of our installation process and options, visit our Gate Installation page. The work includes site measurement, post setting, gate fabrication or fitting, operator installation if electric, and final alignment testing.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate, or your property needs controlled access for security and privacy.
What it costs in San Clemente
Automatic gate installation in San Clemente typically runs $3,400 to $8,200 depending on gate size, operator brand, and whether your driveway is sloped.
How we do it
We measure the opening, check grade and power access, set posts in concrete, mount the gate and operator, wire the system, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, warped beyond repair, or you’re adding a gate to a property that never had one.
What it costs in San Clemente
Driveway gate installation in San Clemente usually falls between $2,800 and $7,500 for a single swing or sliding gate, fabricated or fitted to your opening.
How we do it
We survey the driveway width and swing clearance, recommend swing or sliding based on your slope and space, set the posts, hang the gate, and adjust for even clearance.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the street or there isn’t enough room for a swing gate to open inward or outward.
What it costs in San Clemente
Sliding gate installation in San Clemente typically runs $3,000 to $9,000 including track or cantilever hardware and the gate itself.
How we do it
We install the track or V-wheel system, set guide posts, mount the gate, and adjust rollers so the gate travels smoothly without binding on the slope.
What Gate Installation Costs in San Clemente
| Item | Typical range in San Clemente |
|---|---|
| Pedestrian gate installation | $700 – $2,300 |
| Driveway gate installation | $2,800 – $7,500 |
| Automatic gate installation | $3,400 – $8,200 |
How long does gate installation take in San Clemente?
Most residential gate installations take one to two days. Custom fabricated gates add lead time for manufacturing, usually two to four weeks before installation day.
Do you pull permits for gate installation in San Clemente?
Most residential gate installations don’t require a permit, but automatic gates with vehicle detection loops sometimes trigger city requirements. We’ll confirm what applies to your property before we start and quote the job accordingly.
Brands We Service in San Clemente
We work on DoorKing, Elite, Mighty Mule, and LiftMaster systems in San Clemente, among others. We stock common replacement parts for these brands locally, which means many repairs finish the same day we arrive. See our brands for the full list of systems our technicians are factory-familiar with.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Clemente, CA
| Service | Typical range in San Clemente |
|---|---|
| Gate repair, general | $125 – $450 |
| Hinge replacement | $85 – $250 |
| Gate realignment | $100 – $300 |
| Latch or lock repair | $75 – $225 |
| Electric gate diagnosis | $85 – $200 |
| Circuit board replacement | $300 – $1,100 |
| Motor or operator replacement | $675 – $1,950 |
| Pedestrian gate installation | $700 – $2,300 |
| Driveway gate installation | $2,800 – $7,500 |
| Automatic gate installation | $3,400 – $8,200 |
Salt corrosion in San Clemente often means replacing hardware at the same time as the visible repair, which can push a job toward the upper end of the range. Every price is quoted and agreed before any work starts, so there are no surprises on the invoice.
Neighborhoods We Serve in San Clemente
We cover all of San Clemente from the beach-close streets near the pier up to the hillside neighborhoods in 92673 and across the 92672 and 92674 ZIP codes. Typical response time for non-emergency repairs is one to three business days.
- Pier Bowl and beach-close streets south of the pier
- Shorecliffs
- Talega
- Forster Ranch
- Marblehead
Service Area – Cities Near San Clemente
Beyond San Clemente, we serve the surrounding South Orange County communities. Our technicians regularly work in San Juan Capistrano, CA, Dana Point, CA, Laguna Niguel, CA, and Ladera Ranch, CA with the same gate-specialist team.
Serving San Clemente, CA – Our Local Coverage Area
We’re based in the San Clemente area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Clemente
Yes. If your gate is stuck open and you can’t secure the property, call us and we’ll prioritize same-day or next-morning service where schedule allows. A gate stuck closed and blocking your car is also an emergency for us.
Many San Clemente HOAs, especially in Talega and Forster Ranch, have architectural guidelines for gate height, material, and color. We can build or install to your HOA’s spec and help you submit the required drawings or product sheets.
We serve 92672, 92673, and 92674, including the hillside areas where driveway slopes require sliding gate hardware or heavier-duty operators. Call (866) 562-1205 to confirm your address and get a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What San Clemente Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Danielle Gallagher"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Justin Park"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Cedric Boyd