Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mission Viejo, CA
Gate installation in Mission Viejo usually starts around $1,900 for a basic single-swing residential gate and runs past $9,000 for a long sliding driveway gate with an operator, safety edges, and access control. Most homes here were built between the 1960s and 1990s, which means a lot of the gate work we do is replacing original tract-era wood or vinyl gates that have finally reached the end of their life, or upgrading manual gates to automated systems that meet HOA architectural standards. We’re a gate-only company: no garage doors, no fencing, no general contracting. Call (866) 562-1205 for a free estimate.
Why Mission Viejo Homes Are Different
Mission Viejo was built as a master-planned community, and that changes how gate work gets done here. Most homes sit in HOA-governed villages like Bathgate, Madrid, and Cordova, where gate height, color, material, and even hinge placement have to match the community’s original architectural standards. A homeowner in Madrid can’t just pick any gate from a catalog; the village association often requires a specific color and style, so replacement becomes a replica project rather than an upgrade. We work with those rules every week, and we’ve learned how to source the right hardware and match faded original finishes so a new gate doesn’t stand out from the neighbors.
The other difference is the housing stock itself. Rancho Mission Viejo-era single-family homes and zero-lot-line patio homes often share side-yard gates, which means a sagging gate on your property line may be a shared responsibility with a neighbor. Attached townhome clusters in Cordova and Bathgate have narrow side yards, short setback lines, and gates that open onto common walkways, so a mis-sized replacement won’t pass the architectural review. And the climate does its own damage: warm, dry summers split and warp wood stiles, vinyl expands and contracts with the heat, and winter rain plus marine-layer dampness rusts wrought-iron and steel hinges and latches. A gate installed correctly for Mission Viejo’s conditions lasts years longer than one hung to generic specs.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Mission Viejo Services
Most Mission Viejo homeowners call us for one of two things: an existing gate that stopped working, or an electric gate system that’s lost its reliability. Here’s what each involves.
Gate Repair in Mission Viejo
Gate repair in Mission Viejo usually comes down to the age of the hardware. Original tract-era gates in villages like Madrid and Cordova are now 30 to 50 years old, which means hinges have worn, wood has rotted at the post, and latch posts have shifted in the soil. We repair rather than replace wherever the structure is still sound: new heavy-duty hinges sized for the gate’s weight, post reinforcement, latch alignment, and weld repairs on steel and wrought-iron gates. And because HOAs here require matching styles, repairing an original gate is often faster and cheaper than going through architectural review for a replacement. Gate Repair in Mission Viejo is one of our core services.
Electric Gate Repair in Mission Viejo
When an automatic gate in Mission Viejo won’t open, opens partway, or reverses for no reason, the problem is usually in the operator, the control board, the safety sensors, or the loop detector. Our technicians carry parts and know failure patterns for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so most diagnosis and repair happens in one visit. Mission Viejo’s dry, dusty summers get into control boards and sensor lenses, and winter moisture corrodes wire connections at the motor. We find the root cause, not just the symptom. Electric Gate Repair in Mission Viejo covers motors, boards, sensors, and access hardware.
Gate Installation in Mission Viejo
Gate installation in Mission Viejo runs from about $1,900 for a basic manual single-swing gate to $9,000 or more for an automated sliding driveway gate with a premium operator. Most of the installations we do here fall into two groups: replacing a 30-to-50-year-old tract-era gate that’s beyond repair, or upgrading a manual gate to an automated system. Because Mission Viejo HOAs require matching community gate styles and colors, we handle the replica replacement work, not just generic installs. If you’re weighing whether to repair or replace, start with our Gate Installation overview, then call (866) 562-1205 for a free on-site measure and written price.
Automatic Gate Installation
Signs you need it
You want to open your driveway or side-yard gate from the car or the house, or a manual gate is getting used often enough that automating it makes sense.
What it costs in Mission Viejo
Automatic gate installation in Mission Viejo typically runs $3,100 to $9,100, including the operator, safety edges, and basic access hardware.
How we do it
We set or reinforce the posts to handle the operator’s force, mount the motor and control board, install safety sensors and edges, then program remotes and keypads and test the full cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging, rotting, or too damaged to repair, or the home has never had a driveway gate and you want one.
What it costs in Mission Viejo
Driveway gate installation in Mission Viejo ranges from $2,300 to $9,100 depending on whether it’s a single-swing, double-swing, or sliding gate with automation.
How we do it
We measure the driveway width and slope, set posts in concrete below the soil line, hang and balance the gate, then install the operator and safety equipment if the job is automated.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward or is too short for a swing gate to open without hitting a car, or you want a gate that doesn’t sweep across the driveway.
What it costs in Mission Viejo
Sliding gate installation in Mission Viejo starts around $3,200 and can pass $9,000 for long gate panels with a premium operator and safety loops.
How we do it
We pour a level track base or set a cantilever frame, install the track and rollers, hang the gate panel, mount the operator and rack, and tie in safety loops and edge sensors.
What Gate Installation Costs in Mission Viejo
| Item | Typical range in Mission Viejo |
|---|---|
| Manual single-swing gate | $1,900 – $3,600 |
| Automatic single-swing system | $3,100 – $6,000 |
| Automated sliding gate | $5,300 – $9,100 |
HOA architectural requirements in villages like Madrid and Cordova can add cost when a custom color or specific material is required. The price we quote is the price you pay; we confirm all numbers before any work begins.
How long does gate installation take in Mission Viejo?
A manual gate replacement is usually done in a day. An automated driveway or sliding gate installation typically takes one to two days, depending on concrete work, electrical runs, and programming.
Call (866) 562-1205 to schedule a free measure, and we’ll give you a written timeline before you commit.
Do you match Mission Viejo HOA gate styles?
Yes. We match original wood and vinyl gate profiles, paint colors, and hardware finishes so a replacement clears architectural review. We’ve done replica replacements across Madrid, Cordova, Bathgate, and other Mission Viejo villages.
Bring your HOA gate spec to the estimate, and we’ll quote to it exactly. Call (866) 562-1205.
Brands We Service in Mission Viejo
We stock parts and know the failure patterns for LiftMaster, FAAC, BFT, and Linear gate systems, among others. That means faster diagnosis and most repairs done in one visit, because the right board, sensor, or motor part is already on the truck. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mission Viejo, CA
| Service | Typical range in Mission Viejo |
|---|---|
| Manual single-swing gate installation | $1,900 – $3,600 |
| Automatic single-swing gate installation | $3,100 – $6,000 |
| Automated sliding gate installation | $5,300 – $9,100 |
| Hinge replacement on wood or vinyl gate | $180 – $340 |
| Latch or lock replacement | $140 – $280 |
| Gate post reinforcement or reset | $280 – $600 |
| Operator motor replacement | $370 – $780 |
| Control board replacement | $390 – $780 |
| Loop detector replacement | $350 – $650 |
| Safety sensor or photo eye replacement | $230 – $430 |
In Mission Viejo, prices push higher when HOA specs require a custom color, when a gate sits on a steep driveway that needs extra post depth, or when automation calls for longer wiring runs and additional safety loops. Whatever the job, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Mission Viejo
We work across all of Mission Viejo, including the older village tracts and the gated communities near Lake Mission Viejo. Most calls get same-day or next-day scheduling for repairs.
- Madrid
- Cordova
- Bathgate
- Lake Mission Viejo area
- Rancho Mission Viejo-era tracts
Service Area – Cities Near Mission Viejo
We also serve homeowners and property managers in the communities around Mission Viejo, including Ladera Ranch, CA, Lake Forest, CA, Laguna Hills, CA, and Coto De Caza, CA. If you’re just outside Mission Viejo, call (866) 562-1205 and we’ll confirm coverage for your street.
Serving Mission Viejo, CA – Our Local Coverage Area
We’re based in the Mission Viejo area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mission Viejo
Most Mission Viejo villages require architectural committee approval before a gate is replaced, especially when the gate faces the street or a shared walkway. We work from your community’s gate spec and can quote to the approved color, height, and material so the replacement clears review.
Call (866) 562-1205 if you need help identifying your association’s gate requirements.
For most gate repair calls we schedule same-day or next-day service across Mission Viejo. Repair work is quoted and approved before we start, and our trucks carry parts for all nine major brands we service, so most jobs finish in one visit.
Mission Viejo is our home market, but we also cover Ladera Ranch, Lake Forest, Laguna Hills, and Coto De Caza. If you’re nearby and your gate has failed, call (866) 562-1205 and we’ll let you know if we can schedule you this week.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Mission Viejo Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Nathan Reed"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Sarah Parker"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Rosa Rodriguez